Types of Compressor Safety Valves ?
- Safety Relief Valve
- Pressure Reducing Valvel
- Knife Gate Valve
- Control Valve
- Piston Valve
- Blow down Valve
- Moisture Separator
- Check Valve
- Ball Valve
- Diaphragm Valve
- Gate Valve
- Poppet Valve
- Globe Valve
- Butterfly Valve
- Strainer ('Y'/'T'/Basket)
- Forged Steel Valve
- Cryogenic Valve
- Pressure Seal Valve
- Pinch Valve
Compressor Safety Valve
Compressor Safety Valve that decreases the volume of air or other gas by the application of Air Compressor safety valve from the simple hand pump and the piston-equipped compressor used to inflate tires to valves that use a rotating, bladed element to achieve compression. The four basic types of compressors are reciprocating, rotary screw.These are further classified by the number of compression stages, the cooling method, and lubrication.
HP Valve a Compressor Safety Valve is a gadget that permits liquid or air to stream in one and only bearing. At the point when your compressor achieves the empty weight, the check valves close to keep reverse of the air from the tank to the compressor safety valve head.
A valve in a compressor, typically programmed, which works by weight distinction on the two sides of a versatile, single loaded part and which has no mechanical linkage with the moving parts of the compressor component.Compressors can be classified according to the pressure delivered:
An energetic note on check valves: Many circumstances people will find air spilling from the weight switch. At the point when this happens, they instantly buy and introduce another weight switch. Since air still gaps, they call and express that the switch is defective.
In the event that air is spilling reliably? the issue is not the weight switch - it is the check valve. More than likely it is loaded with garbage and is not fixing. At the point when this happens the check valve either should be cleaned or supplanted.
Applications of Compressor Safety Valve:-
Air compressors safety valve have much utilization, including providing high-weight clean air to fill gas chambers, providing moderate-weight clean air to a submerged surface provided jumper, providing moderate-weight clean air for driving some office and school building pneumatic HVAC control framework valves, providing a lot of direct weight air to control pneumatic devices, for example, jackhammers, filling high weight air tanks (HPA), for filling tires, and to convey immense volumes of direct weight air for broad scale current methodology, (for instance, oxidation for oil cooking or security plant pack house scrub systems).
|Size Range||15 mm TO 200 mm|
|End Connection||Screwed End , Flanged End ,Butt weld|
|Pressure Rating||150 class, 300 class|
|Trims||SS 304,SS 316|
Angle Type(Lever operated / without lever)
Pop Type (Lever operated / without lever)
Open Discharge Type (Lever operated / without lever)
Angle type CP
|Design Standard||API 526 ,520 & IBR|
|Testing Standard||API 527|
|Flange drilling||ANSI B16.5|
|Leakage test||API 527|
|Suitable Application||Steam, Gas, Air, Water, Oil|